|
Home Page > Executive Branch > Code of Federal Regulations > Electronic Code of Federal Regulations
e-CFR Data is current as of February 4, 2010
TITLE 40--Protection of Environment
CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY
SUBCHAPTER U--AIR POLLUTION CONTROLS
PART 1054--CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND EQUIPMENT
Subpart A--OVERVIEW AND APPLICABILITY
|
| Does this part apply for my engines and equipment? |
|
|
| Who is responsible for compliance? |
|
|
| Which nonroad engines are excluded from this part's requirements? |
|
|
| How is this part organized? |
|
|
| Do any other CFR parts apply to me? |
|
|
| What requirements apply to my equipment? |
|
|
| Submission of information. |
|
Subpart B--EMISSION STANDARDS AND RELATED REQUIREMENTS
|
| What emission standards and requirements must my engines meet? |
|
|
| What exhaust emission standards must my handheld engines meet? |
|
|
| What exhaust emission standards must my nonhandheld engines meet? |
|
|
| What is the useful life period for meeting exhaust emission standards? |
|
|
| What evaporative emission standards must my handheld equipment meet? |
|
|
| What evaporative emission standards must my nonhandheld equipment meet? |
|
|
| What other requirements apply? |
|
|
| What emission-related warranty requirements apply to me? |
|
|
| What maintenance instructions must I give to buyers? |
|
|
| What installation instructions must I give to equipment manufacturers? |
|
|
| How must I label and identify the engines I produce? |
|
|
| What is my engine's maximum engine power and displacement? |
|
|
| Are there interim provisions that apply only for a limited time? |
|
Subpart C--CERTIFYING EMISSION FAMILIES
|
| What are the general requirements for obtaining a certificate of conformity? |
|
|
| What must I include in my application? |
|
|
| May I get preliminary approval before I complete my application? |
|
|
| How do I amend the maintenance instructions in my application? |
|
|
| How do I amend my application for certification to include new or modified engines or fuel systems or change an FEL? |
|
|
| How do I select emission families? |
|
|
| What exhaust emission testing must I perform for my application for a certificate of conformity? |
|
|
| How do I demonstrate that my emission family complies with exhaust emission standards? |
|
|
| How do I determine deterioration factors from exhaust durability testing? |
|
|
| What records must I keep and what reports must I send to EPA? |
|
|
| What decisions may EPA make regarding my certificate of conformity? |
|
Subpart D--PRODUCTION-LINE TESTING
|
| When must I test my production-line engines? |
|
|
| How must I prepare and test my production-line engines? |
|
|
| How must I select engines for production-line testing? |
|
|
| How do I know when my engine family fails the production-line testing requirements? |
|
|
| What happens if one of my production-line engines fails to meet emission standards? |
|
|
| What happens if an engine family fails the production-line testing requirements? |
|
|
| May I sell engines from an engine family with a suspended certificate of conformity? |
|
|
| How do I ask EPA to reinstate my suspended certificate? |
|
|
| When may EPA revoke my certificate under this subpart and how may I sell these engines again? |
|
|
| What production-line testing records must I send to EPA? |
|
|
| What records must I keep? |
|
Subpart E--IN-USE TESTING
Subpart F--TEST PROCEDURES
|
| How do I run a valid emission test? |
|
|
| What testing must I perform to establish deterioration factors? |
|
Subpart G--SPECIAL COMPLIANCE PROVISIONS
|
| What compliance provisions apply to these engines? |
|
|
| What is the exemption for delegated final assembly? |
|
|
| What special provisions apply for equipment manufacturers modifying certified nonhandheld engines? |
|
|
| What is the exemption for engines certified to standards for Large SI engines? |
|
|
| What are the provisions for exempting engines used solely for competition? |
|
|
| What requirements apply under the Transition Program for Equipment Manufacturers? |
|
|
| What special provisions apply to equipment imported under the Transition Program for Equipment Manufacturers? |
|
|
| What provisions apply for importation of individual items for personal use? |
|
|
| What special provisions apply for small-volume engine and equipment manufacturers? |
|
|
| What special provisions apply to branded engines? |
|
|
| What special provisions apply for converting an engine to use an alternate fuel? |
|
|
| What special provisions apply for adding or changing governors? |
|
|
| What special provisions apply for installing and removing altitude kits? |
|
|
| What are the provisions for exempting emergency rescue equipment? |
|
|
| What bond requirements apply for certified engines? |
|
Subpart H--AVERAGING, BANKING, AND TRADING FOR CERTIFICATION
|
| How do I generate and calculate exhaust emission credits? |
|
|
| How do I generate and calculate evaporative emission credits? |
|
|
| How do I average emission credits? |
|
|
| How do I bank emission credits? |
|
|
| How do I trade emission credits? |
|
|
| What must I include in my application for certification? |
|
|
| What ABT reports must I send to EPA? |
|
|
| What records must I keep? |
|
|
| What special provisions apply for generating and using emission credits? |
|
|
| What can happen if I do not comply with the provisions of this subpart? |
|
Subpart I--DEFINITIONS AND OTHER REFERENCE INFORMATION
|
| What definitions apply to this part? |
|
|
| What symbols, acronyms, and abbreviations does this part use? |
|
|
| What provisions apply to confidential information? |
|
|
| How do I request a hearing? |
|
|
| What reporting and recordkeeping requirements apply under this part? |
|
|
