|
Home Page > Executive Branch > Code of Federal Regulations > Electronic Code of Federal Regulations
e-CFR Data is current as of February 4, 2010
TITLE 46--Shipping
CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY
SUBCHAPTER F--MARINE ENGINEERING
PART 50--GENERAL PROVISIONS
Subpart 50.01--BASIS AND PURPOSE OF REGULATIONS
|
| OMB control numbers assigned pursuant to the Paperwork Reduction Act. |
|
Subpart 50.05--APPLICATION
|
| Existing boilers, pressure vessels or piping systems. |
|
|
| Vessels subject to regulations in this subchapter. |
|
|
| Steam-propelled motorboats. |
|
Subpart 50.10--DEFINITION OF TERMS USED IN THIS SUBCHAPTER
|
| Coast Guard District Commander or District Commander. |
|
|
| Officer in Charge, Marine Inspection, (OCMI). |
|
|
| Marine inspector or inspector. |
|
Subpart 50.20--PLAN SUBMITTAL AND APPROVAL
|
| Procedures for submittal of plans. |
|
|
| Number of copies of plans required. |
|
|
| Previously approved plans. |
|
|
| Alternative materials or methods of construction. |
|
|
| Marine inspector's decisions. |
|
Subpart 50.25--ACCEPTANCE OF MATERIAL AND PIPING COMPONENTS
|
| Manufacturer or mill certification. |
|
|
| Products requiring manufacturer or mill certification. |
|
|
| Testing of products required to be certified in presence of marine inspector. |
|
|
| Acceptance of piping components by specific letter or approved plan. |
|
Subpart 50.30--FABRICATION INSPECTION
|
| Class I, I-L and II-L pressure vessels. |
|
|
| Class II pressure vessels. |
|
|
| Class III pressure vessels. |
|
|
